I loved this DIY project! It was inexpensive and easy. I am so happy with the way it turned out. I used a vinyl design I bought from Etsy. Link below.
I used an extra frame I already had and ordered the vinyl to fit inside. We then bought a white foam board. I laid the glass on top of the board, traced it, and cut it to fit.
I then carefully pulled the back off of the vinyl, and laid it down centered on the board. Then I taped it in place.
Next, I ran a credit card over the front sheet to get the vinyl to stick to the foam board. After I was certain the vinyl was stuck down, I slowly peeled off the front sheet.
Finally, I placed the new artwork in the frame and voila! Super easy.
Leave a Reply